Pixel Tracking
  • Home /
  • Kettenbach Awards

 

 

  

Futar Fast is an elastomeric, addition silicone, bite registration material with a working time of 15 seconds and an intraoral setting time of 45 seconds.  Futar Fast is dispensed from a standard automix gun.  Due to the shorter working time, Futar Fast is indicated for “small application” myofunctional bite registrations and applications requiring a hard bite registration.  This material can be trimmed with a scalpel or a bur.  Excess Futar Fast material can be easily broken off allowing the correct occlusal position to be checked intraorally promoting precise alignment of upper and lower models.  Each box contains two 50 mL cartridges with 12 mixing tips.  Futar Fast was evaluated by 30 consultants in 514 uses. This bite registration material received a 96% clinical rating.

Shop Now

 

  

Visalys Temp is a bis-acrylic material indicated for provisional crowns, bridges, onlays, and veneers over the short or long term.  The material is formulated to provide strength, durability and excellent aesthetics during the provisional restoration phase.  Visalys Temp is available in six shades, A1, A2, A3, A3.5 and is dispensed from a 50 ml cartridge.  Visalys Temp has a working time of 40 seconds and can be removed from the mouth between 1:20-2:20 minutes.  It has a final set time of 4 minutes from beginning of mix.  Each cartridge comes with 15 mixing tips.  Visalys Temp was evaluated by 19 consultants in 579 uses.  This provisional material received a 97% clinical rating.

Shop Now

 

 

  

Visalys Core is a dual-curing, radiopaque composite that contains fluoride and is BPA free.  It is indicated for core build-ups and cementing root posts.  Visalys Core is available in white and dentin shades.  Light curing time is 20 seconds; self-curing requires 5 minutes.

Unique Features: Visalys Core may be used with any light- or dual-cure adhesive of any generation.  Active-Connect-Technology ensures compatibility with any adhesive: light or dual-curing, single-stage or multi-stage adhesives, with or without an additional activator.

Shop Now

 

Panasil is a line of addition-curing silicones (VPS) impression materials with hydrophilic properties.  A variety of six viscosities and two set times exists.  Panasil can be used for one- or two-step crown and bridge impression techniques as well as denture and reline impressions.  Three viscosities of the fast-set material were evaluated: Panasil tray fast and Panasil initial contact light fast and x-light fast.  Panasil tray fast is a heavy-bodied material for use in the tray and for functional impressions.  Panasil initial contact fast is a syringeable impression material for capturing fine detail around prepared teeth and soft tissue.  Panasil initial contact fast has a working time of one minute with an intraoral setting time of two minutes; total setting time is three minutes.  Panasil initial contact light fast is available in 50ml automix cartridges.  Panasil tray fast is also available in cartridge and foil bags for use in an automatic mixer.  Each box contains two 50ml cartridges of material with 6 or 12 mixing tips.  Panasil was used by 21 consultants in 325 cases.  Panasil received a 96% clinical rating.

Shop Now